瑞士Photonfocus工业相机

当前位置:首页 > 产品展示 > 瑞士Photonfocus工业相机

    SM2-D1024-GB

    来源:localhost    发布于:2014-1-10 16:30:22    点击量:

    产品介绍
        智能相机系列 SM2-D1024-TI6455-80-GB-12 是基于photonfocus CMOS图像传感器A1312和A1024B,该photonfocus CMOS传感器满阱容量(FWC)达到200ke-,优化高动态范围应用和高信噪比(SNR)。在智能相机SM2-D1024-TI6455-80-GB-12 内有一个1.2GHz DSP 实现于Texas Instruments (TI)和几个接口。
        可以使用在发展中的几个软件和调试工具。一个框架和应用在智能相机SM2-D1312(IE)-TI6455-XX-GB-12的帮助下设置完整的应用。用于图像处理的软件库,从MvTech开放源码库用于OpenCV或 Halcon Embedded 9.0。


     
    相机性能
        ■ Photonfocus的A1024 CMOS 传感器芯片
        ■ 1024 x 1024像素分辨率
        ■ 可编程的Texas DSP仪器
        ■ HALCON嵌入式兼容
        ■ 在LinLog特性下高达120dB的动态响应范围
        ■ 75fps@全分辨率
        ■ 全局快门
        ■ 黑白相机
        ■ GigE接口
        ■ 12bit深度分辨率

     

     

    相机参数
     

    SM2-D1024-80-GB-12

     
    VisionCam PS Type 1*
    图像传感器
    Photonfocus A1024B (2. Generation)
    技术
    CMOS主动像元技术
    扫描模式
    逐行扫描
    光学尺寸
    1 (15.42 mm diagonal)
    分辨率
    1024 x 1024像素
    像元尺寸
    10.6 µm x 10.6 µm
    有效感光区域
    10.9 mm x 10.9 mm (maximum)
    暗电流
    2 fA/pixel @ 30°C
    满阱容量
    ~200 ke¯
    光谱范围
    < 400 to 900 nm
    灵敏度
    120 x 10³ DN / (J/m²) @ 610 nm / 8 bit / gain = 1
    (approximately 350 DN / (lux s) @ 610 nm / 8 bit / gain = 1)
    量子效应
    45 % @ 550 nm
    填充因子
    35 % (geometrical)
    动态范围
    60 dB in linear mode; 120 dB with LinLog®
    色彩模式
    黑白
    特性曲线
    Linear, LinLog®,Skimming
    快门模式
    全局快门
    读出模式
    Sequential or simultaneous read out (read out during exposure)
    曝光时间
    10 µs … 0.83 s / 50 ns steps
    帧频
    75 fps
    像素时钟
    40 MHz
    数据通道
    2 (internal)
    固定模式噪声
    < 1 DN RMS @ 8 bit / gain = 1 / offset correction ON
    灰度分辨率
    8 bit / 10 bit/ 12 bit
    模拟增益
    1
    数字增益
    1 / 2 / 4
    配置接口
    Built-in Webserver
    触发模式
    自运行(无触发)/接口触发/外触发输入
    特点
     Region of Interest (ROI)  16 Multiple ROI (MROI)  Decimation Y  Image correction  Look-up table (LUT)
     Constant frame rate  Image information 
     Peak Detector
     Extended trigger input and strobe output functionality
    接口
    GigE
    工作温度
    0°C ... +50°C
    供电
    +12 V DC (±10%)
    功耗
    8.0 W
    镜头接口
    C口(CS口可选)
    尺寸
    60 x 60 x 127 mm³
    重量
    532 g
    相机控制
    Built-in webserver

     

     
    SM2-D1024-TI6455-80-GB-12 CMOS DSP Camera
    Features
          The smart camera SM2-D1024-TI6455-80-GB-12 is based on the Photonfocus CMOS image sensor A1024B. This Photonfocus CMOS sensor with a full well capacity (FWC) of 200 ke- is optimized for high dynamic range applications and a high signal to noise ratio (SNR). In the smart camera SM2-D1024-TI6455-80-GB-12 a 1.2 GHz DSP from Texas Instruments (TI) and several interfaces are implemented.
          In the development several software and debugging tools could be used. A frame work and examples helps to setup the complete application with the smart camera SM2-D1024-TI6455-80-GB-12. For the image processing own software libraries, open source libraries as OpenCV or Halcon Embedded 9.0 from MvTech could be used.
    Camera SM2-D1024-TI6455-80-GB-12

    Speed grade

     
    -80
    frame rate
    75 fps
    Grey Level
    12 Bit

     

    Sensor Properties Photonfocus A1024B
          ■ monochrome 1" CMOS image sensor 
          ■ 1024 x 1024 pixel (megapixel resolution) 
          ■ pixel size: 10.6 µm x 10.6 µm
          ■ Global Shutter
          ■ spectral range: 400 - 900 nm
          ■ LinLog® response curve (linear-logarithmic sensor characteristics)
    Camera Properties
          ■ configurable region of interest (ROI) 
          ■ up to 16 selectable windows (Multiple Region of Interest-MROI)
          ■ image preprocessing with integrated look up tables (LUT)
          ■ integrated digital reduction of fix pattern noise (FPN)
          ■ integrated shading correction
          ■ ultra low trigger delay and low trigger jitter
          ■ lens mount: C-Mount (option CS-Mount)
          ■ MV1 form factor: 60 x 60 mm² (W x H) 
    DSP Module Properties TMS320C6455
          ■ High performance fixed point DSP TMS320C6455
          ■ 0.83 ns instruction cycle, 1.2 GHz clock
          ■ Eight 32-Bit instructions/cycle
          ■ 9600 MIPS/MMACS (16 Bit)
          ■ 512 MB SDRAM
          ■ 2GB SD card
          ■ JTAG program interface
          ■ Isolated inputs and outputs
          ■ RS422 interface
          ■ GigE Interface, configurable for 10/100 MByte/s Ethernet
     
          This camera focus on demanding applications in industrial image processing where an embedded system is an alternative to PC system approaches. The camera with LinLog® sensor technology offers an extraordinary wide dynamic range and a high framerate combined with high resolution. Due to the global shutter of the sensor, even high-speed applications with exposure times in the µs-area are possible. The implemented high performance DSP TMS320C6455 from Texas Instruments (TI) enables leading edge applications with this embedded system.
          For the software development the TI CodeComposerStudio (CCS) is neccessary. Photonfocus supports the newest version 5.3. The single user license (N01D) could be ordered from the TI homepage. For the first steps the 90day evaluation version (CSS-FREE) could be used which has no restrictions. To program the camera a JTAG adapter is necessary which could be ordered together with camera.
          Additional information about the CodeComposerStudio (CCS) from TI:
          For debugging of the camera system an emulator is needed. The emulator XDS200 from TI is supported by the CCS. Due to the USB interface this emulator could also be used for developments together with notebooks.
          Further information about the TI emulator XDS200 could be found here:
     
          The framework and also the examples for the smart camera are based on CCS 5.x. Photonfocus provides also the source code of the framework to enable fast design-in cycles of user inplementations. There are also examples which does not use the framework. These examples show how to use the basic functions of the camera.
    On the SM2 microSD card following items are stored:
           all needed files for CCS development (framework, source code, libraries, examples) in a zip file, 
          camera manual and source code documentation, 
          VIBFinder.exe, this windows tool finds the connected camera if the user does not know the camera IP address, 
          tcpdisplay.jar, JavaApplet to connect to camera build-in webserver and 
          Ethernet.ini, to change the camera IP-address, default address is: 192.168.1.240.
    Product Availability
          SM2-D1024-TI6455-80-GB-12 for sale
          JTAG adapter for sale 


     

    上一篇:SM2-D1312(IE)-GB

    下一篇:MV1-R1280--50-G2

在线销售咨询

销售咨询电话

13308491826

咨询时间

周一至周五
8:30 -- 18:00
友情链接 湖南科天健